Skip to main content
Skip table of contents

NCR Silver


To connect with Cyclr, you need an NCR Developer account.

To set up an account, go to the NCR website:

  1. Select the Sign Up button in the top right corner of the window.

  2. Enter your details, then continue and accept the developer agreement.

  3. Verify your email with the link sent to your account.

Get authentication details

You need a Shared Key and Secret Key in order to access the connector. You also need an NEP Organization value.

To get these from your account, go to the NCR website:

  1. Log in to your account.

  2. Select your email at the top right corner of the window and select dashboard.

  3. Select your application.

  4. Make note of the NEP Organization value under Service User Name. This is the value after acct: and before the @ symbol.

    For example, if the Service User Name is acct:test-drive-486bcc60-9426-4e46-bf9c-90l3e6e5883e@44423c74-6324-446b-97d2-e88538c3c926, the NEP Organization you need is test-drive-486bcc60-9426-4e46-bf9c-90l3e6e5883e.

  5. Select the + icon next to Access Keys.

  6. Make note of the Shared Key and Secret Key.

## Cyclr setup

To set up the NCR Silver connector in Cyclr, go to your console:

  1. Go to Connectors > Application Connector Library.

  2. Use the search box to find the NCR Silver connector.

  3. Select the Setup Required icon.

  4. Enter the below values:

    ValueDescriptionShared KeyThe equivalent of an OAuth client ID.Secret KeyThe equivalent of an OAuth client secret key.NEP OrganizationThe identifier for the organization.

  5. Select Save.

Note: To use different settings for different accounts, leave the value blank. This means Cyclr asks you to enter the value when you install the connector into an account.


For more information, see the NCR API library documentation.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.